
Flood Lights
GOTO Module LED Flood Light
Modular flood light up to 1000W with 15° to 90° beams for stadiums and high masts.
- Power
- 100W to 1000W
- Efficacy
- 150 lm/W
- Protection
- IP66
- Input voltage
- AC 100 to 277 V
- Surge protection
- 6 kV
- Modules from 100W to 1000W
- Beam angles 15°, 30°, 60°, 90°
- Power factor > 0.95
GOTO module flood light, 100W to 1000W
GOTO builds each fitting from identical LED modules. One module gives 100W; larger fittings join modules side by side up to 1000W. Every module runs at a rated 150 lm/W and carries its own lens. Fittings up to 750W come in 30°, 60° or 90° beams; the 1000W fitting comes in 15°, 30° or 60°. Input is AC 100 to 277 V with a power factor above 0.95, and the die-cast aluminum modules are sealed to IP66.
Stadiums, sports fields, high masts, tunnels, ports and airports are the jobs GOTO was built for. They need high output from few mounting points, and they need light to travel a long way and land where the designer intended.
Choosing the beam angle
The beam angle decides how far the light throws and how wide it spreads.
| Beam | Typical use |
|---|---|
| 15° | Far side of a football pitch from a stadium tower, very tall masts |
| 30° | Pitch areas from 20 to 30 m towers, high mast areas in ports |
| 60° | Near side of pitches, tunnels, container yards |
| 90° | Wide yards and aprons from moderate heights, tunnel entrances |
A stadium design usually mixes beams on the same tower. Narrow beams aim at the far touchline, wider beams cover the near half. Because GOTO uses the same module for every beam, the tower looks uniform and spares are simple.
Choosing a GOTO wattage
Calculated output is rated power times 150 lm/W. The quotation gives measured values for your order. The 200W size comes in two module layouts, so tell us the mounting space.
| Wattage | LEDs | Calculated output | Typical use |
|---|---|---|---|
| 100W | 120 | 15,000 lm | Tunnel lighting, small courts |
| 150W | 180 | 22,500 lm | Tunnel entrances, yards |
| 200W | 240 | 30,000 lm | Training pitches |
| 300W | 360 | 45,000 lm | Community stadiums, port areas |
| 400W | 480 | 60,000 lm | High masts, container terminals |
| 500W | 672 | 75,000 lm | Football pitches from towers |
| 750W | 1,008 | 112,500 lm | Stadiums, large high masts |
| 1000W | 1,344 | 150,000 lm | Stadium towers, airport aprons |
A rule of thumb for upgrades: a 1000W GOTO typically replaces a 2000W metal halide stadium floodlight, and a 500W replaces a 1000W metal halide. The lux level and uniformity required by your league or client decide the real count, so a lighting layout is the right next step for stadium jobs.
Power factor and large installations
A power factor above 0.95 means the fitting draws current efficiently from the supply. On a stadium with forty 1000W fittings, a low power factor would force larger cables and transformers and can break utility limits. GOTO keeps the installation within those limits.
The AC 100 to 277 V input covers 110 V, 220 V and 277 V supplies used on sports facilities and industrial sites.
GOTO compared with our other flood lights
- HILE reaches 500W at 170 lm/W in a single housing with a wide beam, good for training grounds on short poles.
- MIKA has lens optics up to 300W with IK08 impact protection, good for courts.
- GOTO is the choice above 500W and wherever beam angle has to be chosen per fitting.
Mounting
GOTO fittings mount on tower crossarms and high mast rings with their brackets. The installer sets the aiming angle at the bracket on site. For stadium work, we recommend aiming from a lighting layout so each fitting points at a defined spot on the pitch.
Options
GOTO comes in 2700K to 6500K. Sports lighting mostly uses 4000K or 6000K. The standard driver carries 6 kV surge protection. For exposed towers and lightning-prone regions, order the 10 kV upgrade. GOTO carries a 5 year warranty.
Applications
- Stadiums and sports fields
- High mast lighting
- Tunnels
- Ports and airports
Specifications
| Power | 100W / 150W / 200W / 300W / 400W / 500W / 750W / 1000W |
|---|---|
| Rated efficacy | 150 lm/W |
| LED chip | SMD 3030 |
| Input voltage | AC 100 to 277 V |
| Ingress protection | IP66 |
| Surge protection | 6 kV |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 15° / 30° / 60° / 90° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum modules, PC lens |
| Warranty | 5 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
GOTO Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 100W | 120 pcs | 15,000 lm | 6 kV | 239 × 318 × 68 mm |
| 150W | 180 pcs | 22,500 lm | 6 kV | 330 × 318 × 71 mm |
| 200W | 240 pcs | 30,000 lm | 6 kV | 421 × 318 × 71 mm |
| 300W | 360 pcs | 45,000 lm | 6 kV | 410 × 386 × 81 mm |
| 400W | 480 pcs | 60,000 lm | 6 kV | 525 × 386 × 81 mm |
| 500W | 672 pcs | 75,000 lm | 6 kV | 453 × 525 × 82 mm |
| 750W | 1008 pcs | 112,500 lm | 6 kV | 640 × 525 × 82 mm |
| 1000W | 1344 pcs | 150,000 lm | 6 kV | 685 × 671 × 88 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
GOTO FAQ
Which GOTO beam angle should I use for a football pitch?
Most pitches combine 15° or 30° beams aimed at the far side with 60° beams aimed at the near side. The mix depends on tower height and position. Send the pitch size and tower locations for a suggestion.
How many GOTO fittings does a stadium need?
That depends on the lux level required for the competition class, the pitch size and the tower heights. A lighting layout gives the number. Send your requirements and we help you get one.
What does power factor above 0.95 mean?
It means the fitting uses current efficiently. Large installations need smaller cables and stay within utility limits on reactive power.
Can GOTO be used in tunnels?
Yes. Tunnels typically use 100W to 150W GOTO fittings with 60° or 90° beams.
Get a Quote for GOTO
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales