
100W LED Flood Light
The 100W size sells more than any other flood light in South Asia and the Middle East. We make it in eight series, from a budget security light to a 170 lm/W project fitting.
100W LED Flood Lights We Supply

HILE LED Flood Light
Our highest efficiency flood light, with 170 lm/W and an AC 90 to 305 V input.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

HILO LED Flood Light
170 lm/W flood light from 50W to 500W in a framed die-cast housing.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

KASO LED Flood Light
One family from 30W to 600W, the easiest series for a distributor to stock.
- 30W to 600W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

MIKA LED Flood Light
Lens optic flood light with IK08 impact rating and a wide AC 85 to 265 V input.
- 30W to 300W
- 130 lm/W
- IP66
- Surge 6 kV

AMOS LED Flood Light
General purpose flood light from 30W to 400W for projects and wholesale.
- 30W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

KALS LED Flood Light
Nine wattages from 10W to 400W, from small security lights to yard lighting.
- 10W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

VENS LED Flood Light
Economy flood light from 10W to 200W for price-led retail channels.
- 10W to 200W
- 90 lm/W
- IP66
- Surge 4 to 6 kV

HITO LED Flood Light
Remote controlled flood light with stepless dimming and switchable CCT.
- 30W to 200W
- IP66

FINO LED Flood Light
One SKU with three color temperatures, set by a DIP switch before installation.
- 30W to 200W
- IP66

KASO RGB LED Flood Light
RGB color flood light with app and remote control.
- 30W to 100W
- IP66

GOTO Module LED Flood Light
Modular flood light up to 1000W with 15° to 90° beams for stadiums and high masts.
- 100W to 1000W
- 150 lm/W
- IP66
- Surge 6 kV
Which of our series come in 100W
Almost every flood series in our range has a 100W model. They share the same IP66 rating and die-cast aluminum body. The differences sit in efficacy, input voltage, optics and price.
| Series | Rated efficacy | Calculated output at 100W | Input voltage | What sets it apart |
|---|---|---|---|---|
| HILE | 170 lm/W | 17,000 lm | AC 90 to 305 V | Highest efficacy, widest input |
| HILO | 170 lm/W | 17,000 lm | AC 90 to 305 V | Same engine in a framed housing |
| GOTO | 150 lm/W | 15,000 lm | AC 100 to 277 V | Module design, 15° to 90° beams |
| MIKA | 130 lm/W | 13,000 lm | AC 85 to 265 V | Lens optics, IK08, 6 kV surge |
| KASO | 110 lm/W | 11,000 lm | AC 180 to 265 V | Eight wattages in one family |
| AMOS | 110 lm/W | 11,000 lm | AC 180 to 265 V | General purpose, project and wholesale |
| KALS | 110 lm/W | 11,000 lm | AC 180 to 265 V | Nine wattages from 10W |
| VENS | 90 lm/W | 9,000 lm | AC 180 to 265 V | Economy line for price-led retail |
The output column is rated power multiplied by rated efficacy. We confirm measured values for your order in the quotation. FINO, HITO and the RGB version of KASO also come in 100W. FINO switches between 3000K, 4000K and 6000K. HITO dims with a remote. KASO RGB changes color. We do not list a lumen figure for these three because the catalog gives no efficacy rating for them.
What a 100W LED flood light replaces
In most retrofit jobs a 100W LED flood light at 110 lm/W or more takes the place of a 250W metal halide floodlight or a 500W halogen. The LED puts its light where the optic points it, while an old reflector lamp loses a good share inside the fitting and in glare. After a year or two of use the metal halide lamp also drops in output, so the gap grows.
Treat this as a starting point. If the old lights were badly aimed or the site now needs more light, the right answer may be 150W. Send us the old wattage, the mounting height and a photo, and we check the swap before you order.
Where 100W fits
A 100W flood light suits these jobs:
- Building facades and boundary walls of houses, shops and small factories
- Car parks and loading areas, one fitting every 15 to 20 m along the edge
- Billboards and shop signs up to medium size
- Security lighting around warehouses, schools and farms
- Small sports courts, as part of a group of fittings
Typical mounting height for 100W is 6 to 9 m. Below 5 m a 100W fitting tends to glare and leave a hot spot under the pole. Above 10 m the light spreads too thin for most tasks, and you should look at our 200W LED flood lights instead.
Choosing the beam
Most of our 100W fittings use a wide flood beam, which suits walls, yards and car parks where the light lands close to the pole. When you need to throw light further, for a court or a tall facade, pick an optic that controls the beam.
MIKA uses lens optics, so more of its output reaches the target and less goes into the sky. GOTO builds its output from LED modules and offers 15°, 30°, 60° and 90° beams, which lets you mix narrow and wide beams on the same project.
Voltage and surge protection for unstable grids
Many of our buyers sell into Pakistan, India and other markets where grid voltage drops at night and spikes during the day. A light that only accepts AC 180 to 265 V can fail or flicker when the supply falls to 160 V. Our economy series, KASO, AMOS, KALS and VENS, run in that range and suit stable grids. For unstable sites choose a project series with a wide input driver:
- MIKA accepts AC 85 to 265 V
- HILE and HILO accept AC 90 to 305 V
- GOTO accepts AC 100 to 277 V
Surges from lightning and grid switching are a common cause of LED driver failure. At 100W, HILE and HILO carry 10 kV surge protection as standard, and MIKA, GOTO, KASO, AMOS, KALS and VENS carry 6 kV. For exposed sites, such as poles on open ground, order the 10 kV upgrade on any series. The higher rating adds a small cost per light. Replacing a dead driver on a pole costs more.
How to compare 100W offers
Two 100W flood lights at the same price can be very different products. When you compare quotations, check these points.
Efficacy basis. Some suppliers quote the LED chip efficacy, which is higher than the efficacy of the finished light after driver and lens losses. Our figures for the series above are rated values for the whole light. Ask every supplier which basis they use.
Real wattage. A light sold as 100W should draw close to 100W. Ask for the measured input power and power factor. Our AC flood lights have a power factor above 0.95.
Driver and surge level. Ask for the input range and the surge rating in kV, written into the quotation.
Housing. A thin housing saves cost and runs the LEDs hotter. Our 100W fittings use die-cast aluminum bodies that double as the heat sink.
Packing data. Carton size, quantity per carton and gross weight decide your freight cost. Our quotation lists them for every item so your forwarder can quote before you pay.
Stocking 100W as a distributor
If you run a lighting shop or a wholesale business, 100W is usually your fastest-moving size. A practical way to stock it:
- Pick one value series for counter sales, such as KASO or KALS. Both cover small and large wattages in one family, so brackets and spare parts stay the same.
- Add one high efficacy series for contractors who compare lumens per watt, such as HILE.
- Keep a few HILE units, which carry 10 kV surge protection, for customers in lightning-prone areas.
We can print your logo on the housing and pack each light in your own color box. See OEM and ODM for the options.
Ordering
Send the wattage, the series you prefer (or the job you need to light), the quantity, the site voltage and your destination port through the form below. We reply with prices, specifications and packing data. Samples are available so you can test the light on your own bracket before the bulk order. You can read how we check each batch on the quality control page.
Built in Our Factory
Our partner factory in Guzhen has made outdoor LED lights since 2014. Housings, molds and final testing all happen under one roof, and the factory lab tests light output, sealing, temperature and electrical safety.




Die-casting in house
The factory casts its own aluminum housings, so it controls wall thickness and fin design for heat dissipation.
Mold making
An in-house mold shop builds new housings for OEM and ODM projects without an outside tooling partner.
Voltage and surge options
Economy series with 4 kV to 6 kV protection on the LED board, project series with wide input drivers and up to 10 kV. Any series can be built to 10 kV.
Aging test
Each finished light runs powered on the aging rack before packing to catch early failures.
Pre-shipment inspection
Your own inspector or a third-party agency can check the goods before loading.
Export packing
Carton sizes and gross weights go into the quotation, and the packing list goes to your forwarder.
FAQ
How many lumens does a 100W LED flood light give?
It depends on efficacy. Calculated from rated efficacy, our 100W models give 9,000 lm (VENS) to 17,000 lm (HILE and HILO). We confirm measured values for each order.
What does a 100W LED flood light replace?
In most layouts it replaces a 250W metal halide or a 500W halogen floodlight. Send us the old fitting details and mounting height and we confirm the swap.
How high should I mount a 100W LED flood light?
6 to 9 m covers most facades, yards and car parks. For higher poles, move to 150W or 200W.
Which 100W flood light works on low or unstable voltage?
Choose MIKA (AC 85 to 265 V), or HILE and HILO (AC 90 to 305 V). These keep running when the supply drops well below 220 V.
Do your 100W flood lights have surge protection?
Yes. The 100W HILE and HILO carry 10 kV, and our other 100W models carry 6 kV. Any of them can be upgraded to 10 kV at extra cost.
Can I get 100W flood lights in different color temperatures?
Yes. Most series come in 3000K, 4000K and 6000K. FINO lets the installer choose among the three with a DIP switch, so you stock one item per wattage.
Can you put our brand on the lights?
Yes. We print your logo on the housing and use your color box, label and manual. Send the artwork with your inquiry.
How do you pack 100W flood lights for export?
The quotation lists carton size, quantity per carton and gross weight, and we prepare the packing list for your forwarder.
Get a Quote for 100W LED Flood Lights
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales