
200W LED Flood Light
At 200W a flood light starts doing real area work: container yards, sports courts, tall facades and factory perimeters. Ten of our series include a 200W model.
200W LED Flood Lights We Supply

HILE LED Flood Light
Our highest efficiency flood light, with 170 lm/W and an AC 90 to 305 V input.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

HILO LED Flood Light
170 lm/W flood light from 50W to 500W in a framed die-cast housing.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

KASO LED Flood Light
One family from 30W to 600W, the easiest series for a distributor to stock.
- 30W to 600W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

MIKA LED Flood Light
Lens optic flood light with IK08 impact rating and a wide AC 85 to 265 V input.
- 30W to 300W
- 130 lm/W
- IP66
- Surge 6 kV

AMOS LED Flood Light
General purpose flood light from 30W to 400W for projects and wholesale.
- 30W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

KALS LED Flood Light
Nine wattages from 10W to 400W, from small security lights to yard lighting.
- 10W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

VENS LED Flood Light
Economy flood light from 10W to 200W for price-led retail channels.
- 10W to 200W
- 90 lm/W
- IP66
- Surge 4 to 6 kV

HITO LED Flood Light
Remote controlled flood light with stepless dimming and switchable CCT.
- 30W to 200W
- IP66

FINO LED Flood Light
One SKU with three color temperatures, set by a DIP switch before installation.
- 30W to 200W
- IP66

GOTO Module LED Flood Light
Modular flood light up to 1000W with 15° to 90° beams for stadiums and high masts.
- 100W to 1000W
- 150 lm/W
- IP66
- Surge 6 kV
Our 200W models side by side
All of the series below use IP66 die-cast aluminum housings. Choose by the output you need, the voltage on site and how far the light has to travel.
| Series | Rated efficacy | Calculated output at 200W | Input voltage | Optics and notes |
|---|---|---|---|---|
| HILE | 170 lm/W | 34,000 lm | AC 90 to 305 V | Flagship, widest input range |
| HILO | 170 lm/W | 34,000 lm | AC 90 to 305 V | Framed housing |
| GOTO | 150 lm/W | 30,000 lm | AC 100 to 277 V | Modules with 15°, 30°, 60° or 90° beams |
| MIKA | 130 lm/W | 26,000 lm | AC 85 to 265 V | Lens optics, IK08, 6 kV surge |
| KASO | 110 lm/W | 22,000 lm | AC 180 to 265 V | One family to 600W |
| AMOS | 110 lm/W | 22,000 lm | AC 180 to 265 V | General purpose |
| KALS | 110 lm/W | 22,000 lm | AC 180 to 265 V | Value line |
| VENS | 90 lm/W | 18,000 lm | AC 180 to 265 V | Lowest unit price |
We calculate the output column as rated power times rated efficacy. Measured values for your order go into the quotation. FINO (switchable color temperature) and HITO (remote dimming and switchable color temperature) also reach 200W; the catalog gives no efficacy rating for them, so we leave their lumen figure out.
The spread is wide. A 200W HILE gives almost twice the light of a 200W VENS. If a buyer compares only the wattage and the price, the cheaper light often looks better on paper and worse on site.
What a 200W LED flood light replaces
Retrofit projects usually swap a 400W metal halide floodlight for a 200W LED at 110 lm/W or better. With a 170 lm/W series such as HILE, a 150W LED can often do the same job, which lowers the price of the light and the energy bill.
Here is a simple example of the saving. A 400W metal halide fitting draws about 450W once you count the ballast. A 200W LED draws about 200W. Over 12 hours a night for a year, each light saves roughly 250W × 12 h × 365 days, or about 1,095 kWh. Multiply by your local tariff and the number of poles to see the yearly figure for a project.
Typical jobs for 200W
- Container yards, truck parks and logistics hubs
- Tennis, basketball and five-a-side courts (several fittings per court)
- Factory and warehouse perimeters
- Facades of mid-rise buildings, hotels and malls
- Large billboards
- Construction sites on temporary masts
For most of these jobs, a mounting height of 8 to 12 m works well. At that height one 200W fitting with a wide beam covers a good part of a truck bay or a court half. For poles above 12 m, or for full-size football pitches, look at the 400W LED flood light or our stadium flood lights.
Diffuser, lens or module?
The optic decides how much of those lumens land on the ground you care about.
Flat diffuser. KASO, AMOS, KALS and VENS spread light wide. This is right for yards and facades lit from close range, where you want even light and no sharp edges.
Lens optics. MIKA puts a lens over the LEDs to shape the beam. More light lands on the target and less spills over the fence or into the sky. This matters on courts next to homes and in places with rules on light spill.
Modules. GOTO builds its 200W output from LED modules and lets you choose 15°, 30°, 60° or 90° beams. On a court you can aim narrow beams at the far side and wide beams at the near side from the same pole.
Heat, housing and lifespan
At 200W the housing has to move a lot of heat. LEDs that run hot lose output faster and their drivers age early. Our 200W fittings use die-cast aluminum bodies that act as the heat sink. When you compare offers, ask for the housing material and look at the fin area. A light that feels very light for its wattage often runs hot.
The rated life of our AC flood lights is more than 50,000 hours, with an operating range of -35 °C to +50 °C. For hot regions, such as the Gulf or Sindh in summer, check that the supplier's temperature rating covers your site.
Power supply on site
Large sites often have long cable runs, and voltage at the far end can fall well below the nominal value. Choose a wide input range for these jobs:
- AC 85 to 265 V: MIKA
- AC 90 to 305 V: HILE, HILO
- AC 100 to 277 V: GOTO
KASO, AMOS, KALS and VENS run on AC 180 to 265 V and suit stable supplies. On surge, the 200W HILE and HILO carry 10 kV and the other 200W models 6 kV. For open ground with frequent lightning, order the 10 kV upgrade on any series.
Questions to ask any 200W supplier
- Is the efficacy for the whole light or the LED chip?
- What is the measured input power and power factor? (Ours is above 0.95 on AC flood lights.)
- What input voltage range and surge rating does the driver have, in kV?
- What is the housing made of?
- What are the carton size, quantity per carton and gross weight?
We answer all five in our quotation without being asked. If you need a 200W light with a higher efficacy or a different driver than the catalog version, the factory can build it to order. See OEM and ODM.
Ordering 200W flood lights
Use the form below. Tell us the series or the job, quantity, site voltage and destination port. We reply with prices, specifications and packing data, and we can send samples for a site trial. Compare with our 100W LED flood lights if your poles are lower than 8 m.
Built in Our Factory
Our partner factory in Guzhen has made outdoor LED lights since 2014. Housings, molds and final testing all happen under one roof, and the factory lab tests light output, sealing, temperature and electrical safety.




Die-casting in house
The factory casts its own aluminum housings, so it controls wall thickness and fin design for heat dissipation.
Mold making
An in-house mold shop builds new housings for OEM and ODM projects without an outside tooling partner.
Voltage and surge options
Economy series with 4 kV to 6 kV protection on the LED board, project series with wide input drivers and up to 10 kV. Any series can be built to 10 kV.
Aging test
Each finished light runs powered on the aging rack before packing to catch early failures.
Pre-shipment inspection
Your own inspector or a third-party agency can check the goods before loading.
Export packing
Carton sizes and gross weights go into the quotation, and the packing list goes to your forwarder.
FAQ
How many lumens does a 200W LED flood light produce?
Calculated from rated efficacy, our 200W models give 18,000 lm (VENS) to 34,000 lm (HILE and HILO). We confirm measured values for each order.
What does a 200W LED flood light replace?
Usually a 400W metal halide floodlight. With HILE or HILO at 170 lm/W, a 150W unit may be enough. Send the old layout and we check it.
What mounting height suits a 200W flood light?
8 to 12 m for yards, courts and facades. Higher poles need 300W to 400W or narrow beam optics.
Which 200W model has the best beam control?
MIKA, with lens optics, and GOTO, with 15° to 90° module beams. Both keep light on the target and reduce spill.
Can a 200W LED flood light run on 110 V?
Yes, with the right series. HILE and HILO accept AC 90 to 305 V, MIKA accepts AC 85 to 265 V, and GOTO accepts AC 100 to 277 V.
How much energy does a 200W LED save over metal halide?
Replacing a 400W metal halide fitting (about 450W with ballast) saves about 250W per light. At 12 hours a night that is roughly 1,095 kWh per light per year.
Can we order 200W lights with our logo?
Yes. We print your logo on the housing and pack in your color box with your labels and manual.
Get a Quote for 200W LED Flood Lights
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales