
400W LED Flood Light
A 400W LED flood light lights ports, large yards and sports fields from poles of 12 m and more. Five of our series include a 400W model.
400W LED Flood Lights We Supply

HILE LED Flood Light
Our highest efficiency flood light, with 170 lm/W and an AC 90 to 305 V input.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

KASO LED Flood Light
One family from 30W to 600W, the easiest series for a distributor to stock.
- 30W to 600W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

AMOS LED Flood Light
General purpose flood light from 30W to 400W for projects and wholesale.
- 30W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

KALS LED Flood Light
Nine wattages from 10W to 400W, from small security lights to yard lighting.
- 10W to 400W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

GOTO Module LED Flood Light
Modular flood light up to 1000W with 15° to 90° beams for stadiums and high masts.
- 100W to 1000W
- 150 lm/W
- IP66
- Surge 6 kV
Five series with a 400W model
| Series | Rated efficacy | Calculated output at 400W | Input voltage | Best for |
|---|---|---|---|---|
| HILE | 170 lm/W | 68,000 lm | AC 90 to 305 V | Projects where lumens per watt decide the tender |
| GOTO | 150 lm/W | 60,000 lm | AC 100 to 277 V | Sports fields and masts, with 15° to 90° beams |
| KASO | 110 lm/W | 44,000 lm | AC 180 to 265 V | Distributor stock, stable grids |
| AMOS | 110 lm/W | 44,000 lm | AC 180 to 265 V | General area lighting |
| KALS | 110 lm/W | 44,000 lm | AC 180 to 265 V | Price-led projects |
Output is calculated as rated power times rated efficacy. We confirm measured values for each order in the quotation.
At this power level the efficacy gap turns into real money. A 400W HILE gives 24,000 lm more than a 400W KASO. On a project with 40 poles, that difference can let you use fewer fittings or a lower wattage for the same light on the ground.
What 400W replaces
In most retrofit layouts a 400W LED flood light at 110 lm/W or more replaces a 1000W metal halide floodlight. A 1000W metal halide fitting draws around 1,080W with its ballast, so each swap cuts the load by well over half. On a large site, that also frees capacity on the transformer and lets the next extension run on the same cables.
With HILE at 170 lm/W, a 300W fitting can often take the place of the 1000W lamp. Before you decide, send us the existing pole heights, spacing and the light level you need. We check the swap and suggest the wattage.
Where 400W is the right size
- Ports, container terminals and rail yards
- Logistics parks with wide truck lanes
- Football and cricket training grounds
- Large car parks at malls and stadiums
- Mining and industrial sites
- High masts around highway interchanges and plazas
Typical mounting height is 12 to 18 m. On a 20 m or higher mast, several 400W to 1000W fittings usually share the head. For full sports lighting design, see our page on stadium LED flood lights.
Beam angle at height
From a tall pole a wide beam spreads light over a big area at a low level. A narrow beam throws it further and keeps the level up at the far edge. Mixing both on one pole gives the most even result.
GOTO builds 400W from LED modules and offers 15°, 30°, 60° and 90° beams. A common pattern on a yard mast is 30° fittings aimed at the far zone and 60° fittings aimed closer to the pole. KASO, AMOS and KALS have wide flood beams and suit lower poles and near-field jobs.
Aim the fittings so the main beam stays below the horizon line. This cuts glare for drivers and crane operators and keeps light off neighboring property.
Hot climates and dust
Buyers in the Gulf and other hot regions ask us about heat first. Our AC flood lights carry an operating temperature rating of -35 °C to +50 °C. If your site sees ambient temperatures above that range in summer, tell us, and we will discuss the driver and housing options with the factory before you order.
All five series are IP66, which protects against dust ingress and powerful water jets. In sandstorm regions, check that the lens and gasket stay sealed after cleaning. Die-cast aluminum housings, which all five series use, hold their shape in heat better than thin pressed housings.
Power supply and surges
Large sites mean long cable runs and voltage drop. Wide input drivers keep the lights running when the supply sags:
- AC 90 to 305 V: HILE
- AC 100 to 277 V: GOTO
KASO, AMOS and KALS run on AC 180 to 265 V and suit stable supplies.
Tall poles in open ground also attract lightning. The 400W HILE carries 10 kV surge protection as standard, and GOTO, KASO, AMOS and KALS carry 6 kV. Any of them can be upgraded to 10 kV with a different driver or an external surge protector. See OEM and ODM for custom builds.
Mounting and wind load
A 400W fitting is larger and heavier than a 100W one, so the bracket and the pole head have to carry it in strong wind. Check the weight and the projected area of the fitting against the pole design. We give the gross weight and carton size of every item in the quotation. For exact fitting weight and dimensions, ask us with your inquiry and we confirm them from the factory.
Comparing 400W offers
At 400W, small differences in a quotation grow into large differences on site. Ask every supplier for:
- Efficacy of the finished light, not the LED chip
- Measured input power and power factor (ours is above 0.95)
- Driver input range and surge rating in kV
- Housing material and operating temperature range
- Carton size, quantity per carton and gross weight
If your poles are shorter than 12 m, a 200W LED flood light usually does the job at a lower cost. For the full range, see all LED flood lights.
Getting a quote
Send the series or the application, quantity, site voltage, pole height and destination port through the form below. We reply with prices, specifications and packing data. Samples are available for site trials. You can read how we test before shipment on the quality control page.
Built in Our Factory
Our partner factory in Guzhen has made outdoor LED lights since 2014. Housings, molds and final testing all happen under one roof, and the factory lab tests light output, sealing, temperature and electrical safety.




Die-casting in house
The factory casts its own aluminum housings, so it controls wall thickness and fin design for heat dissipation.
Mold making
An in-house mold shop builds new housings for OEM and ODM projects without an outside tooling partner.
Voltage and surge options
Economy series with 4 kV to 6 kV protection on the LED board, project series with wide input drivers and up to 10 kV. Any series can be built to 10 kV.
Aging test
Each finished light runs powered on the aging rack before packing to catch early failures.
Pre-shipment inspection
Your own inspector or a third-party agency can check the goods before loading.
Export packing
Carton sizes and gross weights go into the quotation, and the packing list goes to your forwarder.
FAQ
How many lumens does a 400W LED flood light give?
Calculated from rated efficacy, our 400W models give 44,000 lm (KASO, AMOS, KALS), 60,000 lm (GOTO) and 68,000 lm (HILE). We confirm measured values per order.
What does a 400W LED flood light replace?
Usually a 1000W metal halide floodlight. With HILE at 170 lm/W a 300W unit may be enough. Send us the layout and we check it.
What pole height suits a 400W flood light?
12 to 18 m for most yards and fields. On higher masts several fittings share the head.
Do your 400W flood lights work in Middle East heat?
They are rated for -35 °C to +50 °C. If your site runs hotter, tell us before you order and we discuss driver and housing options with the factory.
Which 400W series has adjustable beam angles?
GOTO. It is built from LED modules with 15°, 30°, 60° or 90° beams, so you can mix narrow and wide beams on one pole.
Can you supply 400W flood lights with higher surge protection?
Yes. HILE carries 10 kV as standard. GOTO, KASO, AMOS and KALS carry 6 kV and can be upgraded to 10 kV at extra cost.
Do you supply 400W flood lights under our brand?
Yes. We print your logo on the housing and use your color box, labels and manual.
Get a Quote for 400W LED Flood Lights
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales