
UFO High Bay Lights
MILA UFO High Bay Light
UFO high bay with an optional radar sensor for low-traffic aisles.
- Power
- 100W to 200W
- Efficacy
- 150 lm/W
- Protection
- IP66
- Input voltage
- AC 100 to 277 V
- Surge protection
- 6 kV
- Radar motion sensor option
- 150 lm/W rated efficacy
- 5 year warranty
MILA: a UFO high bay that dims empty aisles
MILA is a UFO LED high bay with an optional radar motion sensor. When nobody is in an aisle, the sensor dims the fitting. When a forklift or worker approaches, it brings the light back to full output. Three sizes, 100W, 150W and 200W, are rated at 150 lm/W, with a 90° beam, AC 100 to 277 V input, 6 kV surge protection and an IP66 die-cast aluminum body. MILA carries a 5 year warranty.
Where the sensor pays off
Many warehouse zones see people only a few times an hour. Lights there burn at full power for nobody. With MILA's sensor, those zones sit dimmed most of the night and light up only when needed. Typical sites:
- Warehouses with low-traffic aisles: picking aisles visited a few times per shift.
- Cold storage: staff enter briefly, and lower lighting load also means less heat inside the cold room.
- Parking garages: lights dim between cars and rise as a vehicle enters.
- Factories: storage areas and corridors next to busy production lines.
The saving depends on how often each zone is used. In aisles that stay empty most of the time, a motion sensor can cut lighting energy well beyond what the 150 lm/W efficacy already saves.
Choosing a MILA wattage
Calculated output is rated power times 150 lm/W. The quotation gives measured values for your order.
| Wattage | LEDs | Calculated output | Typical position |
|---|---|---|---|
| 100W | 120 | 15,000 lm | Parking garages, cold rooms, 4 to 6 m |
| 150W | 180 | 22,500 lm | Picking aisles, 6 to 8 m |
| 200W | 240 | 30,000 lm | Storage halls, 8 to 10 m |
The 90° beam suits ceilings up to about 10 m and open floors. For taller racking with a 60° beam, look at HILA, which reaches 300W.
How to order the sensor
The radar sensor is an option, so state it per item in your inquiry. A single project often mixes versions: MILA with sensor in aisles and cold rooms, MILA without sensor over constant-use areas like packing stations. Tell us the dimmed level and the hold time you want after the last movement, and the quotation confirms what the sensor supports.
Radar sensors detect movement through thin covers and work in cold environments where some infrared sensors struggle. They also react to movement at the edge of their field, so place fittings with the sensor coverage in mind at aisle ends.
MILA compared with HILA and MILU
- HILA: same 150 lm/W and voltage as MILA, adds a 300W size and a 60° beam, without the sensor option.
- MILU: catalog rating of 200 lm/W up to 200W with a 90° beam on AC 85 to 265 V.
- MINO: economy high bay at 120 lm/W.
Voltage and sealing
AC 100 to 277 V input covers 110 V, 220 V and 277 V lighting circuits. IP66 sealing protects the fitting in cold stores where condensation forms and in garages with vehicle exhaust and wash-down.
Options
MILA comes in 2700K to 6500K, with your logo and packaging on request.
Applications
- Warehouses with low traffic aisles
- Cold storage
- Parking garages
- Factories
Specifications
| Power | 100W / 150W / 200W |
|---|---|
| Rated efficacy | 150 lm/W |
| LED chip | SMD 3030 |
| Input voltage | AC 100 to 277 V |
| Ingress protection | IP66 |
| Surge protection | 6 kV |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 90° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum housing, PC lens |
| Sensor | Radar motion sensor option |
| Warranty | 5 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
MILA Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 100W | 120 pcs | 15,000 lm | 6 kV | Ø250 × 90 mm |
| 150W | 180 pcs | 22,500 lm | 6 kV | Ø300 × 100 mm |
| 200W | 240 pcs | 30,000 lm | 6 kV | Ø350 × 120 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare MILA With Similar Series
MILA FAQ
How does the MILA motion sensor save energy?
The radar sensor dims the fitting when the aisle is empty and raises it to full output when movement is detected. In zones that are empty most of the time, the light runs at low power for most of the night.
Is the sensor included as standard?
No. The radar motion sensor is an option. State which MILA fittings need it in your inquiry.
Can MILA be used in a cold store?
Yes. Cold storage is one of the main uses. IP66 sealing handles condensation, and the radar sensor keeps lighting load low between visits.
Which beam angle should I order for a parking garage?
Parking garages have low ceilings, so MILA's 90° beam gives good coverage. For tall racking aisles that need 60°, use HILA.
Related Products

MILU UFO High Bay Light
200 lm/W UFO high bay from 100W to 200W with a wide input voltage.
- 100W to 200W
- 200 lm/W
- IP66

HILA UFO High Bay Light
UFO high bay up to 300W with a 60° beam option for high ceilings.
- 100W to 300W
- 150 lm/W
- IP66
- Surge 6 kV

MINO UFO High Bay Light
Economy UFO high bay, 100W to 200W, for budget-led projects.
- 100W to 200W
- 120 lm/W
- IP66
- Surge 6 kV
Get a Quote for MILA
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales