
UFO High Bay Lights
MINO UFO High Bay Light
Economy UFO high bay, 100W to 200W, for budget-led projects.
- Power
- 100W to 200W
- Efficacy
- 120 lm/W
- Protection
- IP66
- Input voltage
- AC 180 to 265 V
- Surge protection
- 6 kV
- Economy price point
- IP66 rated
- 90° beam
MINO, the economy UFO high bay
MINO is the budget high bay of our range. It gives workshops, small warehouses and covered markets a sealed UFO fitting at a lower price than our 150 lm/W models. Three sizes, 100W, 150W and 200W, are rated at 120 lm/W with a 90° beam, AC 180 to 265 V input, 6 kV surge protection and an IP66 die-cast aluminum body.
Who buys MINO
Small factory owners, market operators and contractors on fixed budgets. Their buildings are often 5 to 8 m high, the lights run one shift a day, and the purchase price weighs more than the electricity saving. MINO also suits distributors who need a high bay at a retail price point next to their premium line.
Even at 120 lm/W, a MINO uses far less power than the metal halide or high pressure sodium high bays it usually replaces, and it starts at full brightness with no warm-up time.
Choosing a MINO wattage
Calculated output is rated power times 120 lm/W. The quotation gives measured values for your order.
| Wattage | LEDs | Calculated output | Typically replaces | Mounting height |
|---|---|---|---|---|
| 100W | 144 | 12,000 lm | 150W to 250W metal halide | 4 to 6 m |
| 150W | 192 | 18,000 lm | 250W metal halide | 6 to 8 m |
| 200W | 288 | 24,000 lm | 400W metal halide | 7 to 9 m |
These pairings are typical. The lux level your work needs and the room layout decide the final choice.
MINO or MILU?
Both have a 90° beam and the same three sizes. The difference is efficacy and voltage:
- HILA: 150 lm/W, AC 100 to 277 V, 5 year warranty. A 150W HILA gives close to the light of a 200W MINO.
- MINO: 120 lm/W, AC 180 to 265 V, lower unit price, 3 year warranty.
If the building runs lights for two or three shifts, MILU's efficiency pays back the higher price sooner. For single-shift workshops and markets, MINO is often the better buy. Customers with unstable supply below 185 V should choose MILU for its wider input range.
For high ceilings above 10 m or motion sensing, look at HILA or MILA.
Upgrading later
Some customers start with MINO to keep the first investment low and move to MILU when the next building or extension comes along. Both share the UFO form, the 90° beam and the same three sizes, so the two ranges look alike in one plant. Plan the electrical layout the same way for both, and the upgrade path stays open.
Installation
MINO hangs from a ceiling hook or mounts to a bracket. In a workshop, place fittings over workbenches and machine areas first, then fill the walkways. A spacing of about 1 to 1.5 times the mounting height works as a starting point on an open floor. The IP66 seal means dust, oil mist and wash-down water do not reach the LEDs.
Options
MINO is available from 2700K to 6500K. Workshops usually choose 6000K for a bright, cool working light. We print your logo on the housing and pack in your color box.
Applications
- Workshops
- Warehouses
- Markets
Specifications
| Power | 100W / 150W / 200W |
|---|---|
| Rated efficacy | 120 lm/W |
| LED chip | SMD 2835 |
| Input voltage | AC 180 to 265 V |
| Ingress protection | IP66 |
| Surge protection | 6 kV |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 90° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum housing, PC lens |
| Warranty | 3 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
MINO Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 100W | 144 pcs | 12,000 lm | 6 kV | Ø237.2 × 30.5 mm |
| 150W | 192 pcs | 18,000 lm | 6 kV | Ø298 × 32.3 mm |
| 200W | 288 pcs | 24,000 lm | 6 kV | Ø332.4 × 32.5 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare MINO With Similar Series
MINO FAQ
Why is MINO cheaper than MILU?
MINO is built for 120 lm/W instead of 150 lm/W and has a narrower input voltage range. That lowers the component cost.
Which MINO replaces a 400W metal halide high bay?
The 200W MINO usually replaces a 400W metal halide fitting at 7 to 9 m. For more output per watt, the 150W MILU is an alternative.
What ceiling height suits MINO?
MINO has a 90° beam and suits ceilings from about 4 to 9 m.
Is MINO suitable for dusty workshops?
Yes. MINO is sealed to IP66, which keeps dust out of the LED chamber.
Related Products

MILU UFO High Bay Light
200 lm/W UFO high bay from 100W to 200W with a wide input voltage.
- 100W to 200W
- 200 lm/W
- IP66

HILA UFO High Bay Light
UFO high bay up to 300W with a 60° beam option for high ceilings.
- 100W to 300W
- 150 lm/W
- IP66
- Surge 6 kV

MILA UFO High Bay Light
UFO high bay with an optional radar sensor for low-traffic aisles.
- 100W to 200W
- 150 lm/W
- IP66
- Surge 6 kV
Get a Quote for MINO
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales