
Flood Lights
HILO LED Flood Light
170 lm/W flood light from 50W to 500W in a framed die-cast housing.
- Power
- 50W to 500W
- Efficacy
- 170 lm/W
- Protection
- IP66
- Input voltage
- AC 90 to 305 V
- Surge protection
- 10 kV
- 170 lm/W rated efficacy
- AC 90 to 305 V input
- Framed die-cast housing
HILO flood light in a framed housing
The HILO LED flood light uses the same 170 lm/W rating and AC 90 to 305 V input as HILE, packed in a framed die-cast aluminum housing. Six sizes cover 50W, 100W, 150W, 200W, 300W and 500W, all sealed to IP66, with 10 kV surge protection and a 5 year warranty. Plazas, logistics yards, facades and billboards are where buyers use it most.
The framed design gives HILO a squarer, flatter face. Architects and sign contractors often prefer that look on a building or billboard, where the fitting stays visible during the day.
The 150W step
HILO includes a 150W size that HILE does not. On facades and plazas, a design often lands between 100W and 200W per position. The 150W HILO fills that gap with a calculated 25,500 lm, so the contractor does not oversize every fitting to the next step up.
Choosing a HILO wattage
Calculated output equals rated power times 170 lm/W. Your quotation lists measured values.
| Wattage | LEDs | Calculated output | Typical use |
|---|---|---|---|
| 50W | 72 | 8,500 lm | Small signs, building corners |
| 100W | 120 | 17,000 lm | Billboards, shop facades |
| 150W | 180 | 25,500 lm | Plazas, mid-size facades |
| 200W | 240 | 34,000 lm | Logistics yards, large billboards |
| 300W | 360 | 51,000 lm | Truck yards, open storage |
| 500W | 600 | 85,000 lm | Large open areas from tall poles |
For billboard lighting, a common approach places one fitting per 3 to 4 m of board width, mounted below or above the face and aimed across it. Board size, the distance from the face and the brightness of the surroundings change that, so send the board dimensions and we suggest a layout.
HILO or HILE?
Both run at 170 lm/W on AC 90 to 305 V. Pick by housing and size steps:
- HILE has six sizes up to 500W, with a 400W step for large yards.
- HILO has a framed body and a 150W step, better for facades, plazas and billboards.
Further down the range, KASO and AMOS cost less at 110 lm/W, and MIKA adds lens optics and IK08.
Facade work
On building facades, mount HILO close to the wall and aim it upward at a shallow angle to graze the surface, or set it back a few meters to wash the whole face evenly. Grazing brings out texture on stone and brick. Washing gives flat, even light on painted walls. A 100W or 150W HILO in 3000K is a common choice for hotel and office facades of four to six floors.
Voltage, sealing and mounting
AC 90 to 305 V input means HILO handles 110 V, 220 V and 277 V supplies and copes with heavy voltage swings. The driver carries 10 kV surge protection, line to neutral and line to earth. The housing is sealed to IP66, so rain and dust do not reach the LEDs. HILO mounts on its bracket to walls, poles or billboard frames, and the bracket lets the installer set the tilt on site.
Options
HILO is offered in 2700K to 6500K. Facades often use 3000K, while yards and billboards use 4000K or 6000K. You can order HILO with your logo and in your own color box.
Applications
- Plazas and squares
- Logistics yards
- Facades
- Billboards
Specifications
| Power | 50W / 100W / 150W / 200W / 300W / 500W |
|---|---|
| Rated efficacy | 170 lm/W |
| LED chip | SMD 3030 |
| Input voltage | AC 90 to 305 V |
| Ingress protection | IP66 |
| Surge protection | 10 kV (L-N and L+N-PE) |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 60° / 90° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum housing, PC lens |
| Warranty | 5 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
HILO Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 50W | 72 pcs | 8,500 lm | 10 kV | 220 × 180 × 34 mm |
| 100W | 120 pcs | 17,000 lm | 10 kV | 280 × 220 × 34 mm |
| 150W | 180 pcs | 25,500 lm | 10 kV | 320 × 255 × 46 mm |
| 200W | 240 pcs | 34,000 lm | 10 kV | 360 × 285 × 49 mm |
| 300W | 360 pcs | 51,000 lm | 10 kV | 400 × 320 × 55 mm |
| 500W | 600 pcs | 85,000 lm | 10 kV | 510 × 400 × 60 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare HILO With Similar Series
| Series | Power | Efficacy | Input voltage | Protection | Surge (standard) | Warranty |
|---|---|---|---|---|---|---|
| HILE | 50W to 500W | 170 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| HILO | 50W to 500W | 170 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| KASO | 30W to 600W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| MIKA | 30W to 300W | 130 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
| AMOS | 30W to 400W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| KALS | 10W to 400W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| VENS | 10W to 200W | 90 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| HITO | 30W to 200W | On request | AC 180 to 265 V | IP66 | On request | 3 years |
| FINO | 30W to 200W | On request | AC 185 to 265 V | IP66 | On request | On request |
| KASO RGB | 30W to 100W | On request | AC 85 to 265 V | IP66 | On request | 3 years |
HILO FAQ
What is the difference between HILO and HILE flood lights?
They share the 170 lm/W rating and AC 90 to 305 V input. HILO has a framed housing and a 150W size. HILE adds a 400W size. Choose by the look you need and the wattage steps in your design.
How many HILO lights does a billboard need?
A common layout uses one fitting per 3 to 4 m of board width. Send the board size and mounting position and we suggest the wattage and number of fittings.
Is the HILO flood light the same as the HILO street light?
No. The HILO street light is a road fitting on a Ø65 mm spigot at 150 lm/W. The HILO flood light is a bracket-mounted floodlight at 170 lm/W.
Can HILO be used on 110 V supplies?
Yes. HILO accepts AC 90 to 305 V, which includes 110 V and 120 V networks.
Related Products

HILE LED Flood Light
Our highest efficiency flood light, with 170 lm/W and an AC 90 to 305 V input.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

KASO LED Flood Light
One family from 30W to 600W, the easiest series for a distributor to stock.
- 30W to 600W
- 110 lm/W
- IP66
- Surge 4 to 6 kV

MIKA LED Flood Light
Lens optic flood light with IK08 impact rating and a wide AC 85 to 265 V input.
- 30W to 300W
- 130 lm/W
- IP66
- Surge 6 kV
Get a Quote for HILO
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales