
Flood Lights
VENS LED Flood Light
Economy flood light from 10W to 200W for price-led retail channels.
- Power
- 10W to 200W
- Efficacy
- 90 lm/W
- Protection
- IP66
- Input voltage
- AC 180 to 265 V
- Surge protection
- 4 to 6 kV
- Lowest unit price in the range
- IP66 die-cast body
- Seven wattages from 10W
VENS for price-led channels
VENS is the economy line of our flood range. It exists for one reason: to reach a lower price point for retail channels and tenders where the cheapest compliant offer wins. To get there it runs at a rated 90 lm/W instead of the 110 lm/W of KASO or KALS. Everything else that keeps a floodlight alive outdoors stays: an IP66 seal, a die-cast aluminum housing, AC 180 to 265 V input and a 120° beam. Surge protection sits on the LED board: 4 kV up to 30W, 6 kV from 50W up.
Seven sizes cover 10W, 20W, 30W, 50W, 100W, 150W and 200W.
Where VENS sells
Retail distribution, small shops and temporary lighting are the main uses. A hardware store selling floodlights by the carton, a contractor lighting a site for six months, or a reseller competing on online marketplaces all care about unit price before efficacy. On a 30W fitting over a doorway, the difference between 90 and 110 lm/W is a few hundred lumens and hardly visible.
Choosing a VENS wattage
Calculated output is rated power times 90 lm/W. The quotation gives measured values for your order.
| Wattage | LEDs | Calculated output | Typical use |
|---|---|---|---|
| 10W | 12 | 900 lm | Porches, small garden spots |
| 20W | 24 | 1,800 lm | Garages, corridors outside |
| 30W | 36 | 2,700 lm | Small signs, side entrances |
| 50W | 72 | 4,500 lm | House walls, shop fronts |
| 100W | 144 | 9,000 lm | Small yards, site lighting |
| 150W | 216 | 13,500 lm | Workshop yards |
| 200W | 288 | 18,000 lm | Temporary site floodlighting |
If a customer needs the light output of a 100W KALS from VENS, the 150W VENS comes closest. For large yards and permanent project work, we suggest KASO or KALS, since the efficacy gap grows with wattage.
VENS, KALS or KASO?
- VENS: lowest unit price, 90 lm/W, up to 200W.
- KALS: 110 lm/W, 10W to 400W, same voltage range.
- KASO: 110 lm/W, 30W to 600W, same voltage range, one housing family for the whole shelf.
Many distributors stock VENS for the shelf and KALS or KASO for project customers, all in one container.
Selling VENS against cheap plastic floodlights
In retail, VENS competes with low-price floodlights that use plastic or thin pressed housings. A die-cast aluminum body and an IP66 seal are easy points to show at the counter: the customer can feel the weight of the housing. Those points let a shop hold a fair price on VENS while staying close to the cheapest offers on the shelf.
Voltage and sealing
VENS accepts AC 180 to 265 V, the normal range for 220 V to 240 V networks. Its IP66 seal keeps rain and dust out, so even the economy line can stay outdoors year-round.
Your brand on VENS
Retail sells on packaging. We print your logo on the housing and pack VENS in your color box with your barcode label. Color temperatures run from 2700K to 6500K, with 3000K, 4000K and 6000K the common picks. Send your artwork with the inquiry and the quotation confirms the packaging options per size.
Applications
- Retail distribution
- Homes and shops
- Temporary lighting
Specifications
| Power | 10W / 20W / 30W / 50W / 100W / 150W / 200W |
|---|---|
| Rated efficacy | 90 lm/W |
| LED chip | SMD 2835 |
| Input voltage | AC 180 to 265 V |
| Ingress protection | IP66 |
| Surge protection | 4 kV (10W to 30W), 6 kV (50W to 200W) |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 120° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum housing, PC lens |
| Warranty | 3 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
VENS Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 10W | 12 pcs | 900 lm | 4 kV | 118 × 90 × 25 mm |
| 20W | 24 pcs | 1,800 lm | 4 kV | 138 × 113 × 25 mm |
| 30W | 36 pcs | 2,700 lm | 4 kV | 148 × 123 × 25 mm |
| 50W | 72 pcs | 4,500 lm | 6 kV | 178 × 152 × 25 mm |
| 100W | 144 pcs | 9,000 lm | 6 kV | 218 × 182 × 25 mm |
| 150W | 216 pcs | 13,500 lm | 6 kV | 238 × 212 × 25 mm |
| 200W | 288 pcs | 18,000 lm | 6 kV | 298 × 212 × 25 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare VENS With Similar Series
| Series | Power | Efficacy | Input voltage | Protection | Surge (standard) | Warranty |
|---|---|---|---|---|---|---|
| HILE | 50W to 500W | 170 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| HILO | 50W to 500W | 170 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| KASO | 30W to 600W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| MIKA | 30W to 300W | 130 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
| AMOS | 30W to 400W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| KALS | 10W to 400W | 110 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| VENS | 10W to 200W | 90 lm/W | AC 180 to 265 V | IP66 | 4 to 6 kV | 3 years |
| HITO | 30W to 200W | On request | AC 180 to 265 V | IP66 | On request | 3 years |
| FINO | 30W to 200W | On request | AC 185 to 265 V | IP66 | On request | On request |
| KASO RGB | 30W to 100W | On request | AC 85 to 265 V | IP66 | On request | 3 years |
VENS FAQ
Why is VENS cheaper than other flood lights?
VENS is built for 90 lm/W instead of 110 lm/W or more, which lowers the component cost. The housing is still die-cast aluminum and sealed to IP66.
Is VENS waterproof?
Yes. VENS is rated IP66, which protects against dust and water jets from any direction.
What is the largest VENS model?
The 200W model, with 288 LEDs and a calculated 18,000 lm. For higher wattages, use KALS or KASO.
Can VENS be packed in our retail box?
Yes. We pack VENS in your color box with your logo and label. Send artwork with your inquiry.
Related Products

HILE LED Flood Light
Our highest efficiency flood light, with 170 lm/W and an AC 90 to 305 V input.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

HILO LED Flood Light
170 lm/W flood light from 50W to 500W in a framed die-cast housing.
- 50W to 500W
- 170 lm/W
- IP66
- Surge 10 kV

KASO LED Flood Light
One family from 30W to 600W, the easiest series for a distributor to stock.
- 30W to 600W
- 110 lm/W
- IP66
- Surge 4 to 6 kV
Get a Quote for VENS
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales