
LED Street Lights
HILO LED Street Light
Main road street light, 100W to 300W, with a Ø65 mm mount and wide input voltage.
- Power
- 100W to 300W
- Efficacy
- 150 lm/W
- Protection
- IP66
- Input voltage
- AC 90 to 305 V
- Surge protection
- 10 kV
- Ø65 mm pole mount
- Wide AC 90 to 305 V input
- 10 kV surge protection
HILO for arterial roads
The HILO LED street light is sized for city avenues, main roads, bridges and industrial park roads, where specifications usually call for 150W to 300W per pole. Five steps cover that band: 100W, 150W, 200W, 250W and 300W. Every size is rated at 150 lm/W, accepts AC 90 to 305 V, carries 10 kV surge protection and sits in an IP66 die-cast aluminum housing. The warranty is 5 years.
The 250W step is the reason many contractors pick HILO. On a road where 200W falls short of the lux target and 300W overshoots it, the 250W size keeps the design close to the requirement without paying for extra watts.
Ø65 mm mounting
HILO mounts on a Ø65 mm pole spigot. That diameter is common on heavier arms used for main roads and bridges. If your poles carry 60 mm arms, look at KILA, which has the same efficacy and input range on a Ø60 mm mount. Checking the arm diameter before you order saves an adapter on every pole.
Choosing a HILO wattage
Output figures are calculated as rated power times 150 lm/W. The quotation gives measured values for your order.
| Wattage | LEDs | Calculated output | Typical use |
|---|---|---|---|
| 100W | 104 | 15,000 lm | Service roads beside main roads |
| 150W | 160 | 22,500 lm | Two-lane avenues, 9 to 10 m poles |
| 200W | 216 | 30,000 lm | Four-lane avenues and bridges |
| 250W | 288 | 37,500 lm | Wide avenues between 200W and 300W designs |
| 300W | 360 | 45,000 lm | Six-lane roads, interchanges, 12 m poles |
A 150W to 200W HILO usually replaces a 400W high pressure sodium lamp on a main road. Uniformity and glare rules in your tender can change that, so we prefer to check the layout before we quote.
Voltage and climate
The AC 90 to 305 V input keeps HILO running when the grid sags at night or rises after midnight. It also lets one product serve 110 V, 220 V and 277 V networks, and the 10 kV surge protection covers long overhead feeds on bridges and avenues. The IP66 seal protects the LEDs and driver from dust and driving rain, which matters on bridges and coastal roads where wind pushes water at the fitting from below.
HILO among our street lights
- KILA: same 150 lm/W, AC 85 to 265 V, Ø60 mm spigot, sizes up to 400W.
- LOTA: module engine for tall poles, 100W to 300W.
- LETO: adds IK08 and a replaceable surge module, aimed at retrofit tenders.
- LOMA: slimmer body for city streets up to 200W.
Note that we also sell a HILO flood light. The street light is a different product with a road optic and a pole mount. Quote the full name, HILO LED street light, in your inquiry so we price the right item.
Customization
HILO is offered in 2700K to 6500K. Most avenues use 4000K. Your logo can go on the housing, and we pack in your color box on request. If you need higher efficacy for a tender, ask and we quote a separate configuration.
Applications
- City avenues
- Main roads
- Bridges
- Industrial parks
Specifications
| Power | 100W / 150W / 200W / 250W / 300W |
|---|---|
| Rated efficacy | 150 lm/W |
| LED chip | SMD 3030 |
| Input voltage | AC 90 to 305 V |
| Ingress protection | IP66 |
| Surge protection | 10 kV (L-N and L+N-PE) |
| Color temperature | 2700K to 6500K |
| Color rendering | Ra ≥ 80 |
| Beam angle | 140° × 75° |
| Power factor | > 0.95 |
| Housing | Die-cast aluminum housing, PC lens |
| Mounting | Ø65 mm pole spigot |
| Warranty | 5 years |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
HILO Models
| Power | LEDs | Luminous flux* | Surge (L-N) | Size |
|---|---|---|---|---|
| 100W | 104 pcs | 15,000 lm | 10 kV | 552 × 220 × 110 mm |
| 150W | 160 pcs | 22,500 lm | 10 kV | 603 × 234 × 110 mm |
| 200W | 216 pcs | 30,000 lm | 10 kV | 645 × 284 × 110 mm |
| 250W | 288 pcs | 37,500 lm | 10 kV | 700 × 280 × 120 mm |
| 300W | 360 pcs | 45,000 lm | 10 kV | 760 × 300 × 120 mm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare HILO With Similar Series
| Series | Power | Efficacy | Input voltage | Protection | Surge (standard) | Warranty |
|---|---|---|---|---|---|---|
| LOLA | 30W to 150W | 150 lm/W | AC 185 to 265 V | IP66 | 6 kV | 3 years |
| KILA | 100W to 400W | 150 lm/W | AC 85 to 265 V | IP66 | On request | On request |
| HILO | 100W to 300W | 150 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| LOMA | 50W to 200W | 110 lm/W | AC 185 to 265 V | IP66 | 6 kV | 3 years |
| LEGO | 50W to 200W | 110 lm/W | AC 180 to 265 V | IP66 | 6 kV | 3 years |
| LETO | 30W to 300W | 120 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
| LOTA | 100W to 300W | 110 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
HILO FAQ
What is the difference between the HILO street light and the HILO flood light?
They share a name but not a design. The HILO street light has a road optic and a Ø65 mm pole mount. The HILO flood light has a bracket mount and runs at 170 lm/W on AC 90 to 305 V. Name the product type in your inquiry.
Why choose the 250W HILO?
It fills the gap between 200W and 300W. On wide avenues where 200W misses the lux target, 250W meets it with less energy than a 300W fitting.
Can HILO be fitted to 60 mm arms?
HILO is designed for a Ø65 mm spigot. For 60 mm arms choose KILA, which has the same efficacy and input range.
Which color temperature do you recommend for main roads?
Most road authorities specify 4000K. Some markets prefer 6000K for a brighter look. Check your tender, then list the CCT in your inquiry.
Related Products

LOLA LED Street Light
Compact 150 lm/W street light for residential roads and village lanes, 30W to 150W.
- 30W to 150W
- 150 lm/W
- IP66
- Surge 6 kV

KILA LED Street Light
High power street light up to 400W with a wide 85 to 265 V input for unstable grids.
- 100W to 400W
- 150 lm/W
- IP66

LOMA LED Street Light
Slim 50W to 200W street light at 150 lm/W for city roads and housing estates.
- 50W to 200W
- 110 lm/W
- IP66
- Surge 6 kV
Get a Quote for HILO
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales