
LED Street Lights
KILA LED Street Light
High power street light up to 400W with a wide 85 to 265 V input for unstable grids.
- Power
- 100W to 400W
- Efficacy
- 150 lm/W
- Protection
- IP66
- Input voltage
- AC 85 to 265 V
- Up to 400W in one fitting
- Wide AC 85 to 265 V input
- 150 lm/W rated efficacy
A high power street light for main roads
KILA is the street light we offer when a road needs more than 150W per pole. The series runs from 100W to 400W in five steps, all rated at 150 lm/W, all in an IP66 die-cast aluminum housing. Highways, arterial roads, port access roads and wide junctions are the usual jobs.
The point of a five-size family is that a contractor can light a whole project with one fitting type. Feeder roads take the 100W or 150W, the main carriageway takes 200W or 300W, and a large intersection takes 400W. The installer learns one bracket and one wiring layout, and the client holds one set of spares.
Built for grids that swing
KILA accepts AC 85 to 265 V. That range matters in markets where voltage sags at night when the load peaks, or spikes when the load drops in the early morning. A driver with narrow input shuts down or overheats when voltage leaves its window. A wide input driver keeps the light on through those swings. Buyers in Pakistan and India often ask about it first.
The same range also lets one KILA order serve both 110 V and 220 V networks, which helps importers who supply more than one country.
Choosing a KILA wattage
Calculated output below is rated power multiplied by 150 lm/W. Your quotation lists measured values.
| Wattage | LEDs | Calculated output | Typical use |
|---|---|---|---|
| 100W | 168 | 15,000 lm | Feeder and service roads, 8 m poles |
| 150W | 240 | 22,500 lm | Two-lane main roads, 9 to 10 m poles |
| 200W | 320 | 30,000 lm | Four-lane roads, industrial zones, 10 to 12 m poles |
| 300W | 480 | 45,000 lm | Highways, port roads, 12 m poles |
| 400W | 600 | 60,000 lm | Large junctions, toll areas, logistics yards |
A common rule of thumb on main roads: a 150W to 200W LED fitting at 150 lm/W replaces a 400W high pressure sodium lamp. Treat this as a starting point. The road class in your tender, the pole layout and the required uniformity decide the final wattage, and we can check a layout you send us.
Mounting
KILA mounts on a Ø60 mm pole spigot. On high wattage fittings the mounting matters more because the fitting is heavier and catches more wind at height, so check that your arm and pole are rated for it. The quotation gives the details you need for that check.
KILA and the other street lights in our range
- HILO street light covers 100W to 300W with the same 150 lm/W, a wider AC 90 to 305 V input and 10 kV surge protection, on a Ø65 mm spigot. Pick by the arm diameter your poles use.
- LOTA reaches 300W with a module LED engine, a better fit for very tall poles where heat spreading matters.
- LETO stops at 300W but adds IK08 and a replaceable surge module for lightning-prone sites.
- LOLA and LOMA cover the smaller residential sizes.
Options
You can order KILA with your logo on the housing and in your own packaging. If a tender scores efficacy, ask for a higher efficacy version and we quote it separately. For lightning-prone sites, order the 10 kV surge upgrade, which every series in our range can take.
Applications
- Highways and main roads
- Industrial zones
- Ports and logistics yards
- Large intersections
Specifications
| Power | 100W / 150W / 200W / 300W / 400W |
|---|---|
| Rated efficacy | 150 lm/W |
| Input voltage | AC 85 to 265 V |
| Ingress protection | IP66 |
| Color rendering | Ra > 80 |
| Power factor | > 0.9 |
| Housing | Die-cast aluminum housing, PC lens |
| Mounting | Ø60 mm pole spigot |
| Operating temperature | -35 °C to +50 °C |
| Rated life | > 50,000 h |
10 kV surge upgrade
The values here are our standard configuration. Every series can be built with 10 kV surge protection for exposed poles and lightning-prone regions, at a small extra cost.
Packing and shipping
Our quotation lists the carton size, quantity per carton and gross weight of each item. We prepare the packing list for your forwarder.
KILA Models
| Power | LEDs | Luminous flux* |
|---|---|---|
| 100W | 168 pcs | 15,000 lm |
| 150W | 240 pcs | 22,500 lm |
| 200W | 320 pcs | 30,000 lm |
| 300W | 480 pcs | 45,000 lm |
| 400W | 600 pcs | 60,000 lm |
*Calculated as rated power × rated efficacy. Measured values per order are confirmed in the quotation.
Compare KILA With Similar Series
| Series | Power | Efficacy | Input voltage | Protection | Surge (standard) | Warranty |
|---|---|---|---|---|---|---|
| LOLA | 30W to 150W | 150 lm/W | AC 185 to 265 V | IP66 | 6 kV | 3 years |
| KILA | 100W to 400W | 150 lm/W | AC 85 to 265 V | IP66 | On request | On request |
| HILO | 100W to 300W | 150 lm/W | AC 90 to 305 V | IP66 | 10 kV | 5 years |
| LOMA | 50W to 200W | 110 lm/W | AC 185 to 265 V | IP66 | 6 kV | 3 years |
| LEGO | 50W to 200W | 110 lm/W | AC 180 to 265 V | IP66 | 6 kV | 3 years |
| LETO | 30W to 300W | 120 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
| LOTA | 100W to 300W | 110 lm/W | AC 85 to 265 V | IP66 | 6 kV | 3 years |
KILA FAQ
What is the largest KILA street light?
The 400W model, with 600 LEDs and a calculated 60,000 lm at 150 lm/W. It is meant for large junctions, toll plazas and logistics yards rather than ordinary roads.
Does KILA work on 110 V and 220 V?
Yes. KILA accepts AC 85 to 265 V, which covers both 110 V and 220 V networks and tolerates large voltage swings.
Which KILA size replaces a 400W sodium lamp?
On most main roads the 150W or 200W KILA replaces a 400W high pressure sodium lamp. Send road width, pole height and spacing and we confirm the size before quoting.
What surge protection does KILA have?
The quotation states the standard surge level for each KILA model. If the site sits on long overhead lines or sees frequent lightning, order the 10 kV upgrade at extra cost.
Related Products

LOLA LED Street Light
Compact 150 lm/W street light for residential roads and village lanes, 30W to 150W.
- 30W to 150W
- 150 lm/W
- IP66
- Surge 6 kV

HILO LED Street Light
Main road street light, 100W to 300W, with a Ø65 mm mount and wide input voltage.
- 100W to 300W
- 150 lm/W
- IP66
- Surge 10 kV

LOMA LED Street Light
Slim 50W to 200W street light at 150 lm/W for city roads and housing estates.
- 50W to 200W
- 110 lm/W
- IP66
- Surge 6 kV
Get a Quote for KILA
Send us your requirement. We reply with prices, specifications and packing data.
- Chat with sales